MODEL 311 - Sensoray Model 311 - PC/104+ Frame Grabber Simple Type: CPU...
Request Quote
For Price
- Part Number:
- MODEL 311
- Model Number:
- MODEL 311
- Make:
- SENSORY
- Lead Time:
- Available
- Qty In Stock:
- Available
Sensoray Model 311 - PC/104+ Frame Grabber Simple Type: CPU Board
The 311 PC104+ frame grabber allows the capture of monochrome and color images from a variety of analog video sources into computer memory (RAM). The 311 is designed to work with standard TV signal sources, compatible to the following video standards: color: NTSC-M, NTSC-Japan, PAL-B, PAL-D, PAL-G, PAL-H, PAL-I, PAL-M, PAL-N, SECAM monochrome: CCIR, RS-170. The 311 digitally locks to the incoming video signals providing a stable output regardless of the signal source. The input’s 4:1 multiplexer allows the selection between four composite or three composite and one Y/C (S-Video) analog video inputs, which makes it possible to connect up to four video sources to the frame grabber. The signal components (luminance and chrominance) are digitized with two separate 8-bit A/D converters. Low-pass filtering and double over-sampling of the input signal provide precise digitization with no aliasing artifacts. The digital signal is then scaled and/or cropped to the desired dimensions, if necessary. The scaled image is transferred to the host RAM using the PCI bus mastering mode, which requires minimum CPU attention. An onboard FIFO provides necessary buffering, minimizing the probability of image loss.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 4:1 multiplexer
- 8-bit general I/O
- Allows capture of monochrome and color images from analog video sources
- Digitally locks to the incoming video signals regardless of signal source
Specifications
- Board Type: PC/104 & PC/104 Plus
- Bus requirements: PC104+, 33 MHz, 32-bit, 5 V
- Capture rate: Real time [2], 30 fps (NTSC, RS-170), 25 fps (PAL, SECAM, CCIR)
- I/O: 4 output and 4 input lines, TTL/CMOS, 1 optocoupled interrupt input (14 pin ribbon cable connector).
- Operating Temp.: 0°C to 70°C
- Output formats: RGB (15, 16, 24, 32 bits/pixel), Y8 (8 bits/pixel), YCrCb (16 bits/pixel)
- Output resolution: 754x480 (NTSC, RS-170), 922x576 (PAL, SECAM, CCIR)
- Power Consumption: 300 mA (max) @ +5V
- Video inputs: 4 analog composite video; 1 analog Y/C (S-video) [1].
- Video sources: NTSC, PAL, SECAM, RS-170, CCIR
Applications
- None Available
Aliases
- None Available